Product Name : Quality Metal Scrap ( HMS1 / HMS2 )

Product Price :

Product Details :

Our Metal scrap  HMS1 / HMS2 conform with the steel scrap specifications and standards of the Institute of Scrap Recycling Industries (ISRI) and ISO INSPECTION and has the following specifications as set out below:
 
Specification
Item Specification
C%≤ 0.08
Si %≤ 1.00
S%≤ 0.03
P%≤ 0.045
Cr%≤ 20
Mn%≤ 2.00
Ni%≤ 10.5

 

 
GRADE:          #1 HMS
DIMENSIONS:  3’ x 2’ maximum
1/4″ minimum thickness
4″ maximum thickness
MINIMUM DENSITY:   50 lbs. per cubic ft.
MAXIMUM WEIGHT PER PIECE:
95% – 200 lbs. or less
500 lbs. maximum
DESCRIPTION: Very dense, clean, new or obsolete wrought iron and/or scrap.
MAY INCLUDE:
Railroad scrap (wheels must be cut in half)
OTM (obsolete track material i.e. plates & spikes) is purchased as #1 HMS
Pipe (must be split if over 6″ diameter)
Heavy truck wheels and crankshafts
Black Clips
Punchings
RESTRICTIONS:  No cast iron, No sheet steel (tin), No highly alloyed steel, No lead, lead pipe or lead weights, No Rebar or wire, No turnings, No porcelainized material, No Nails

 

GRADE:                #2 HMS (includes “mixed scrap”)
DIMENSIONS:        3’ x 2’ maximum
1/8″ minimum thickness
MINIMUM DENSITY:   42 lbs. per cubic ft.
DESCRIPTION:       Dense, clean, new or obsolete wrought iron and/or steel scrap
MAY INCLUDE:     All properly prepared pipe (less than 2″ in diameter), light structural steel and rebar (acceptable as #2 HMS) cut in 2’ max lengths & no more than 10% of the load may be rebar, unless previous contact with Raw Materials was established.
RESTRICTIONS: No turnings, No white goods or other sheet “tin”, No porcelainized material, No alloyed steel, No lead, lead pipe or lead weights, No Nails